Quantum Cell

Quantum Cell

129.00

Use a Quantum Cell on any cell phone, wireless device, or vehicle, and it will become safer to use immediately! The EarthCalm Quantum Cell is a thin, durable patch that helps protect you against the radiation output of any device you put it on. Our research has shown that the Quantum Cell effectively reverses the damaging effects of EMFs, and it also increases the conductivity of human DNA. It is because of this fact that we view our Quantum Cell as a critical addition to absolutely anything that produces RF and microwave radiation.

We developed this product at EarthCalm so that everyone can enjoy the benefits of our world’s technologies, without having to worry as much about the hazards that they impose.* We highly recommend pairing the Quantum Cell with wearable and whole house protection for our highest level of coverage!

*Please note: EarthCalm highly recommends that you always use earphones or a speaker phone when using a cell phone. Holding a microwave-producing device against your head, so close to your brain, should never be considered 100% safe, even with several levels of protection. Likewise, we strongly encourage parents to ensure that cell phones and tablets are placed on tables instead of laps when used by children. Please use great measures of caution when it comes to kids, as their bodies may absorb more radiation than adults. Be sure to apply a Quantum Cell to all devices used by children and adults alike.

Quantity:
Add To Cart

Before You Get Started

Before you apply the Quantum Cell, notice how you feel when you are in close proximity to your cell phone or wireless device. Also, consider writing down any ongoing symptoms you have been experiencing regularly, no matter what their source. After applying the Quantum Cell, begin to take notice of whether there has been a change in how you feel. Often, symptoms such as headaches (common with microwave sensitivities) are noticeably reduced within hours! Reevaluate your symptoms after a few weeks. Many people are surprised to find that electrosensitivity has been at the root of their condition all along.


Instructions

The Quantum Cell is ready to use, as is. Do not peel it open. Please note that the provided adhesive tab is not always necessary, so read the following before applying. 

If Your Device has a case:  Do not apply the provided adhesive tab. Instead, slide the Quantum Cell between the case and the device, placing it over the location of the battery, if possible. This should be considered the best option for installation. Placing the Quantum Cell under a case keeps it in excellent condition, and not adhering it makes it much easier to move if needed. 

Device without case: Apply the provided adhesive tab to the Quantum Cell. To apply, first pull off one of the white tabs, then place the underlying sticky-tack onto the silver side of the Quantum Cell. Next, pull off the remaining white tab to expose the adhesive. Place directly onto the back of your device, adhesive side down. Place it over the location of the battery, if possible.

Vehicles: Apply the provided adhesive tab to the Quantum Cell. To apply, first pull off one of the white tabs, then place the underlying sticky-tack onto the silver side of the Quantum Cell. Next, pull off the remaining white tab to expose the adhesive. Adhere, sticky side down, to a metal surface within the interior of your vehicle. This is typically around the inside of a door or trunk lid. 

Smart Meters: Apply the provided adhesive tab to the Quantum Cell. To apply, first pull off one of the adhesives white tabs, then place the underlying sticky-tack onto the silver side of the Quantum Cell. Next, pull off the remaining white tab to expose the adhesive. Place onto any available surface of your Smart Meter or solar inverter, sticky side down. Next, cover the Quantum Cell entirely with weatherproof tape, this will keep it protected from rain and weather.

Wi-Fi Routers:  Apply the provided adhesive tab to the Quantum Cell as instructed above. To apply, first pull off one of the adhesives white tabs, then place the underlying sticky-tack onto the silver side of the Quantum Cell. Next, pull off the remaining white tab to expose the adhesive. Place anywhere on your Wi-Fi router, except for areas with vents or buttons. 

Take Your Time

People who are generally healthy, and not suffering from symptoms of electrosensitivity, usually adapt to our TECHNOLOGY with ease. However, people who are electrosensitive will occasionally experience negative symptoms when beginning to use our products. These symptoms usually include things like temporary lightheadedness, nausea, fatigue, and/ or restlessness. We see these types of negative reactions as an “electromagnetic detox”; an adjustment to the relief of an otherwise constant physical stressor. 

Starting with the Quantum Cell?

If you are new to our products, and beginning with the Quantum Cell, don’t apply the provided adhesive right away. Instead, secure the Quantum Cell to your device under a case, or with household tape (most types peel off easily). Doing this allows you time to take notice of how you feel. If you don’t have any type of reaction, apply to your device as directed. If you do feel a reaction to the Quantum Cell, however, it is a good idea to remove it from your space in intervals, to allow for a slower adaptation. To do this, begin by applying the Quantum cell to your device for hour long intervals, alternating by removing it and placing it away from you for two to three hours. You can also place the entire device with the attached Quantum Cell in another room, but some may find this difficult if they need to use it. Gradually decrease the lengths of the intervals until you feel completely comfortable. Most people adapt within a day or two.

The Best Way to Begin

There are many people who buy our products without realizing they are electrosensitive, and it is surprising to them when they have detox symptoms. In consideration of those that are sensitive, we designed our INFINITY HOME SYSTEM to be introduced in four separate Phases, which allows everyone the ability to increase the strength of their system at their own pace. We recommend that everyone who is new to our technology begin with the Home System, for the best possible adaptation. 

Are you Electrosensitive?

If you already know that you are electrosensitive before using our products, we highly suggest that you take note of any symptoms that you are experiencing both before and during your adaptation period. Include timings if possible. This is especially helpful when discussing your experience with our customer service representatives. It is important that you move at your own pace during the adaptation period. Remember, EarthCalm has a 90-Day Money Back Guarantee specifically to allow for this!